Procool Sliding Triple Door Back Bar Cooler
-
What are the interior dimensions of this back bar cooler?
The interior dimensions of this cooler are not exact due to the compressor space taken up on the bottom and the fan on the top. The width is 49", the height is 29.25" and the depths are bottom 7", middle 14.25" and top 12.75".
-
Will the inside dimensions allow this unit to be utilized as a remote draw cooler for half kegs.
Unfortunately due to the rear mounted compressor, half kegs will not fit in this bar cooler.
-
How much noise does this cooler make with compressor running?
This back bar cooler runs at around 56 dB.
-
how much does this weigh? how much room is needed in the back (i.e. can i set it up right against a wall)?
This cooler weighs 190 lbs. The manufacturer recommends 3" clearance in the back for circulation.
-
What are the AMPs on this unit?
This back bar cooler cooler draws 1.3 Amps.
-
I purchased one of these back in December from you ... I have misplaced the manual Manuel and need to program the thermostat. I have checked Pro cools website and nothing is available for this thermostat. Do you have a copy you could send me
We do have this available under "Manuals" at the top of our website - it is the first one. There is also a YouTube video for this controller.
-
is the cooling unit attached? I’ve seen some back bar coolers that are just the Storage area and u are expected to hook it up to existing refrigeration. This would be for home use so I want to make sure it would be something That all I have to do is plug in. Also, just want to confirm that the depth is 21 inches. Thanks
Yes, our back bar coolers have the compressor inside and only need to be plugged in. This model is 21" deep.